Tunnel-group DefaultRAGroup general-attributes Isakmp policy 10 authentication pre-share Snmp-server enable traps snmp authentication linkup linkdown coldstartĬrypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmacĬrypto dynamic-map Outside_dyn_map 20 set transform-set ESP-3DES-SHAĬrypto dynamic-map Outside_dyn_map 40 set transform-set ESP-3DES-SHAĬrypto map Outside_map 65535 ipsec-isakmp dynamic Outside_dyn_map
Username ****** password ****** encrypted privilege 15Īaa local authentication attempts max-fail 3 Port-forward-name value Application Accessīanner value You are now connect to ****** Corp. Nat (Inside) 0 access-list Inside_nat0_outbound Result of the command: "show running-config"ĭescription This is the outside interfaceĪccess-list Inside_nat0_inbound extended permit ip 192.168.201.0 255.255.255.0 192.168.200.32 255.255.255.224Īccess-list outside_access_in remark Web Mail RuleĪccess-list outside_access_in extended permit tcp any host ****** eq httpsĪccess-list outside_access_in remark VPN Rule for connecting to exchangeĪccess-list outside_access_in extended permit tcp any host ****** eq smtpĪccess-list outside_access_in extended deny tcp any anyĪccess-list Inside_nat0_outbound extended permit ip 192.168.201.0 255.255.255.0 10.10.10.0 255.255.255.0Īccess-list split standard permit 192.168.201.0 255.255.255.0 I can continue from the error and enter CLI commands to the ASA such as show running-config, etc. Please check the configuration and your connection and then try again by clicking the Refresh icon." "ASDM is unable to read the configuration form the ASA.
I can download and install asdm but when I try to connect I get : I can access the ASA via ASDM on the maintenance interface but cannot on the inside interface. I have taken over a network which has an ASA5520.